Edge single polishing spindle-machine for coast toro and other forms elaboration of flat edges and bullnose profiles and plan automatic, tickness working 20 - 150 mm., The single-head automatic edge-polishing machine 1T , completely designed in stabilized steel in order to avoid any possible deformations, performs and polishes 2 to 15 cm thick bullnose edges. Within the range of round edges it can carry out : full bullnose, demi bullnose, ogee, double bevel, special profiles and multi-bevel ( see chart ). It can furthermore polish straight edges and 2 to 12 cm thick counter-bevels. By means of a control panel the machine can automatically process shaped profiles using shaped wheels as well as the bush-hammering cycle. The spindle head pressure is automatically set. Mod. MONLEVI MULTIPROFIL 1T. Cod. 06-24
Vertical polishing edge machine second-hand, straight edge, sens of working from right to left, automatic multi spindles belt polishing machine used, is able to perform: calibration/gauging, straight edge, bevels, upper groove, lower groove, sloping cuts and their polishing, bullnose edges with regular round shapes. Mod. Marmomeccanica LTV 621 DX Cod. 25-23
Block tilter machine used, block tilting oleodinamic machine to tilt big dimensions blocks, thanks to the action of hydraulic cylinders to ensure ease of operation and safety of use. The tilting is controlled by a mobile push-button panel. Mod. Officine PASI Cod. 22-23
Automatic second-hand bridge mono head bush hammering machine for slabs and strips for marble or granite Basic bush hammering machine for all workshops in the stone processing sector, versatile and efficient. The operating is very easy to use. The detection and storage of slab contours being processed are made directly by positioning the operating head. differents working cycles and the number of times you want to repeat them can be preset. Shifting from the processing on a slab and the next and the final return to the start point is automatic. Machine for the surface treatment through pneumatic tools hammers number and characteristics of the tools used simultaneously as a function of the degree of finish and the level of production requests. A bridge for independent vertical movement of the slide sliding left-right of the working group allows a wide range of different thicknesses. Mod. CORTAN Cod. 24-19
The second-hand machinery Hand polishing machine used (manettone) with column, built of casting iron with the turning arms mounted on ball bearing for to polishing marble and granite, 2 speed Mod. BISSO MB 2/2S Cod. 09-16
Second hand bridge saw cnc QUADRIX DV is a medium-sized numeric control cutting and shaping center with 5 interpolated axes having Z axis stroke 640 mm, rotary head, prepared for single or incremental – pass cutting and shaping processes for the performance of marble, granite, stone and sintered materials products. It is suitable for oblique, circular, elliptical, inclined cuts, rectilinear, concave, convex, arched, elliptic shapes, excavations of two-dimensional and three-dimensional slabs. TILTING BENCH AND CAD-CAM It is equipped with a series of electro-spindles controlled by inverter and it can be fitted with ISO 40 type connection diamond tools, such as end mill, milling wheel and a horizontal blade The possibility to mount blade having max diameter of 900 mm grants the possibility to cut up to 330 mm thickness . Mod. DONATONI QUADRIX DV Cod. 15-19
Automatic tow columns electronic block-cutter second-hand machine for marble and granite, Sawing machine able to transform marble and granite blocks into semi machined slabs having a maximum height of 1500 mm and the thickness desired, giant bridge saw diameter vertical disk 3.500 mm., ghisa structure, Giant Blade Saw. Two strong welded steel columns support and guide vertical movement of bridge of large dimensions made in special cast iron. Mod. TERZAGO T35 Cod. 37-19;
Polishing edge machine for plat used on sale, straight edge, for coast plain sense of working from left to right, 8 heads 4 spindles, Mod. MONTRESOR LOLA100 S 8+4 Cod. 23-23 polishing flat edge
Second hand combined machine for calibrating and polishing tiles, strips of model marble, equipped with 1 calibrating spindle installed on a fixed bridge and dressing and 8 polishing spindles installed on the second bridge. Width 1.000mm., 1 calibrator head +8 polishing heads - Mod. SIMEC Mod. LM92 1000/18 Cod. 27-23
Waterjet cutting system second-hand at CNC for any kind of processing cutting and shaping of marble and granite and other materials with plastic, iron, glass, etc., one head of cut, dimension bench to 3.000 x 2.000 mm., mod. Waterjet Flow 7XDE-60 cod. 04-24
The second-hand Polishing machine for marble tiles 2 calibrator gauging head, 10 polishing heads, useful working 650 mm., horizontal movement bridge of polishing heads, Mod. PEDRINI Lucidatrice B065MV 600 2+10 Cod. 21-23
Second hand bridge saw cnc QUADRIX DV 900 is a medium-sized numeric control cutting and shaping center with 5 interpolated axes having Z axis stroke 640 mm, rotary head, prepared for single or incremental – pass cutting and shaping processes for the performance of marble, granite, stone and sintered materials products. It is suitable for oblique, circular, elliptical, inclined cuts, rectilinear, concave, convex, arched, elliptic shapes, excavations of two-dimensional and three-dimensional slabs. TILTING BENCH AND CAD-CAM It is equipped with a series of electro-spindles controlled by inverter and it can be fitted with ISO 40 type connection diamond tools, such as end mill, milling wheel and a horizontal blade The possibility to mount blade having max diameter of 900 mm grants the possibility to cut up to 330 mm thickness . Mod. DONATONI Jet 900 Cod. 01-25
Waterjet cutting system 5 axis second-hand at CNC for any kind of processing cutting and shaping of marble and granite and other materials with plastic, iron, glass, etc., one head of cut, dimension bench to 4.000 x 2.000 mm., mod. Flow Waterjet Mach 200 Cod. 03-25
Second hand bridge saw cnc QUADRIX DV 900 is a medium-sized numeric control cutting and shaping center with 5 interpolated axes having Z axis stroke 640 mm, rotary head, prepared for single or incremental – pass cutting and shaping processes for the performance of marble, granite, stone and sintered materials products. It is suitable for oblique, circular, elliptical, inclined cuts, rectilinear, concave, convex, arched, elliptic shapes, excavations of two-dimensional and three-dimensional slabs. TILTING BENCH AND CAD-CAM It is equipped with a series of electro-spindles controlled by inverter and it can be fitted with ISO 40 type connection diamond tools, such as end mill, milling wheel and a horizontal blade The possibility to mount blade having max diameter of 900 mm grants the possibility to cut up to 330 mm thickness . Mod. DONATONI Jet 900 Cod. 01-25
Polishing edge machine, straigth edge cast iron inox structure sense of working from left to right, second hand machinery for to edge polishing to marble and granite, 10 heads spindles polishing, 4 bevelling spindles, gauging and spindle for groove, Mod. COMANDULLI EDILUX 10+4 SX cod. 05-20
Second hand bridge saw cnc QUADRIX DV 900 is a medium-sized numeric control cutting and shaping center with 5 interpolated axes having Z axis stroke 640 mm, rotary head, prepared for single or incremental – pass cutting and shaping processes for the performance of marble, granite, stone and sintered materials products. It is suitable for oblique, circular, elliptical, inclined cuts, rectilinear, concave, convex, arched, elliptic shapes, excavations of two-dimensional and three-dimensional slabs. TILTING BENCH AND CAD-CAM It is equipped with a series of electro-spindles controlled by inverter and it can be fitted with ISO 40 type connection diamond tools, such as end mill, milling wheel and a horizontal blade The possibility to mount blade having max diameter of 900 mm grants the possibility to cut up to 330 mm thickness . Mod. DONATONI QUADRIX DV 900 Cod. 48-22
Vertical splitting machine for to split in two parts strips or tiles marble, useful cutting width max. 310 mm., diameter disk 825 mm., useful working right to left, carter iron INOX Mod. BARSI SCO 1 DISCK H3/210 Cod. 05-25
Overturning tipper for tilting tiles or strips second-hand machine for marble and granite, barrel overturnig used machine for strips or tiles Mod. Guglielmi Cod. 47-22
SIFA Ecology jaw crushers are characterized by a sturdy structure suitable for the processing of very hard stone, such as granite, porphiry and stones, as well as marble and limestone.This second-hand machinery are ideal both for primary and secondary crushing, for output capacities of up to 2 m3/hr. They are well known for their low maintenance and low operating cost. SIFA mod. ECOLOGY Cod. 05-24
CALIBRATOR - POLISHING USED MACHINE FOR MARBLE, 2 calibrator gauging heads, 8 polishing heads, useful working 800 mm. - Sense of working from left to right - Mod. CMPI ANTARES 2D+8A/800 - Cod. 19-19
Second-hand bridge saw QUADRIX F1 is a medium-sized numeric control cutting with 3 interpolated axes having Z axis stroke 450 mm, rotary head, prepared for single or incremental – pass cutting and shaping processes for the performance of marble, granite, stone and sintered materials products. It is suitable for oblique, circular, elliptical, inclined cuts, rectilinear, concave, convex, arched, elliptic shapes, excavations of two-dimensional and three-dimensional slabs. TILTING BENCH The possibility to mount blade having max diameter of 625 mm grants the possibility to cut up to 260 mm thickness . Mod. DONATONI QUADRIX F1 Cod. 17-19
Work center CNC 5 axis for any kind of processing shaping, profiling, milling, chamfering, drilling of marble and granite, axel Z 1.000 mm., dimension bench to 2.000 - 3.000 mm., diameter disc 1.000 mm., CONO ISO 40, tilting head, automatic changing tools, tilting bench, Mod. OMAG BLADE GN Cod. 05-21
Quarry Single diamond wire machine used for to cut and blocks squaring of marble or granite, Diamond wire sawing machines for cutting marble and similar stones with main motor powers of 50Hp. The translation and the 360° rotation of the main flywheel, powered by electric motors. It is possible to operate even on inclined surfaces, in any direction and to cut horizontally at zero levels. MARINI QUARRIES GROUP mod. MAR FIL SUPER Cod. 40-19
SECOND HAND MACHINE FOR TO CUT MARBLE AND GRANITE FOUR COLUMNS MULTIDISKS (40 DISKS) BLOCK CUTTER FOR MARBLE AND GRANITE DIAMETER VERTICAL DISK 1.300 mm., DIAMETER HORIZONTAL DISK 400 mm., IRON STRUCTURE, complete with automatic unloader aereo, LAITI & PETRONILLI Mod. LPG40 Cod. 42-17
The profiling machine LISTA has been designed to profile linear ceramic elements, suitable for machining different profiles on ceramic, porcelain stoneware, marble and granite strips. The spindle headstocks of adequate size are provided with motorised vertical and transversal adjustment and allow to select the rotation direction and speed of the tools according to the type of operation and materials. Both presetting and working operations can be carried out by an operator standing in front of the machines. Mod. PRAGMA LISTA 307 Z- Cod. 10-19
MULTIHEAD CROSS CUTTER MACHINE AUTOMATIC WITH 5 DISKS FOR MARBLE AND GRANITE, SENS OF WORKING FROM LIFT TO RIGTH, type SOCOMAC AT615-3 Code 49-07
Aspiration bench, air purification system for bench machining work. In the front part of the machine the extraction process is dry; in the rear part, inside the column, the dust from machining is captured and purified by a water turbine. Mod. CAMPAGNOLA & FEDELI AIRECO Cod. 55-16
Accessories for diamond wire system, Spares parts for diamond wire machine Mod. PELLEGRINI DIAMANTFIL DF2500 Cod. 48-19
Single head cross second hand cutter machine, pneumatic movement with hunting disk movement for marble and granite, useful cutting 450 mm., diameter disk 400 mm. Mod. Laiti & Petronilli L450 Cod. 07-22
Single head cross second hand cutter machine, pneumatic movement with hunting disk movement for marble and granite, useful cutting 450 mm., diameter disk 400 mm. Mod. Laiti & Petronilli L450 Cod. 08-22
Bridge saw machine, hydraulic movement hydraulic, structure in ghisa, manual rotating table bench, diameter disk 625 mm., tilting head, rails on oil bath, Mod. TERZAGO F 35 S Cod. 11-22
ATTESTATRICE AUTOMATICA MONODISCO MARMO GRANITO RETTILINEA,- ha una struttura solida atta a sostenere e movimentare lastrati pesanti; - ha il piano d'appoggio formato da nastro in gomma di grosso spessore motorizzato, con possibilità d'impostare l'avanzamento automatico del materiale, alla quota scelta dall'operatore su tastiera e indicando con gesso, si giova di un inverter che gestisce l'avanzamento del carro porta mandrino con rallentamento della velocità di taglio nella fase terminale per eliminare rotture del materiale ed è completa di ritorno rapido del gruppo di taglio, puó lavorare sia in automatico che con ciclo manuale permettendo all'operatore la scelta migliore in dipendenza del materiale e della produzione da ottenere; è dotata di tastiera alfanumerica per l'impostazione e la scelta dei cicli di taglio; - offre all'operatore il vantaggio di effettuare tagli a misura grazie ai riscontri mobili a scomparsa di cui è provvisto il banco Mod. GUGLIELMI ATTS B01H600M Cod. 14-22
The filter press, designed to work automatically without an operator, is perfect for sludge dewatering in dry pans with minimal residual moisture and to recover the maximum treated water, which will be reused in a closed production cycle or to be discharged safely in the environment, taking up the minimum space possible. Second hand filter medium-large 15 plates 800x800 mm. complete with centrifugal loading pump and structure. Mod. SIGMA TECNOFILTER 800/15 Cod. 16-22
Hand polishing machine (manettone) wall type, radial arm polisher for marble, built of casting iron with the turning arms mounted on ball bearing for to polishing marble and granite, motorized up-down arm, with plates polishing diam. 300/400 mm. Mod. N.D. Cod. 36-22
Hand polishing machine (manettone) wall type, radial arm polisher for marble, built of casting iron with the turning arms mounted on ball bearing for to polishing marble and granite, motorized up-down arm, with plates polishing diam. 300/400 mm. Mod. SAIE Cod. 49-22
Single diamond wire, second hand machine, for to cut blocks in slabs for different measures and squarries the blocks of marble or granite Mod. PELLEGRINI DIAMANTFIL DF 2000 Cod. 03-23
Oleodynamic bridge saw machine used, tilting head to 45°, manual turnable table, TILTING BENCH, laser, optical viewer of measurements Mod. ZAMBON HYDRO-U Cod. 04-23
Single diamond wire vertical profiling used machine for cutting profiles, using diamond wire, saw little thicks blocks and slabs, the second-hand machine has variable cutting speed, aluminium structure. Mod. ZEGA Z 3000 Cod. 06-23
Polishing edge machine, straigth edge cast iron inox structure sens of working from left to rigth, second hand machinery for to edge polishing to marble and granite, 8 front spindles, 4 bevelling spindles, gauging calibrator, Multifunction, 1500/3000 rpm, 4,3/5,7 hp, Tilting (0°-90°) pneumatic calibrator in entrance, 1500/3000 rpm, 4,3/5,7 hp. Mod. Sassomeccanica CDF Extended 8+4 sx Cod. 10-23
Second hand machine for to cut block of marble, Frame used to square off marble blocks and saw very thick blocks, using just one diamond, blade 800 mm STROKE For greater production and lower consumption of diamond segments. It is ideal for defective and abrasive materials. Automatic cutting programmer displayed on pannel, controlled by PLC. Mod. BM SUPER C800 Cod. 19-23
Polishing edge second-hand machine for marble and granite, straight edge cast iron inox structure sense of working from right to left COMANDULLI EDILUX 8+4 DX cod. 28-13
Dust removable table stainless stell structure inox used, aspiration bench second hand with water treatment, dust collector with work bench, a dust damper a decanter and exhauster. Mod. ITALMARMI AIR3 INOX Cod. 28-23
Oleodynamic bridge saw machine used, tilting head to 45°, manual turnable table, machine with automatic cuts, laser, optical viewer of measurements Mod. ZAMBON HYDRO-U Cod. 29-23
The second-hand Polishing - gauging machine for marble tiles 1 calibrator gauging head (rotating diamond head), 5 polishing heads. Polishing used machine useful working of polishing 600 mm., horizontal movement bridge of polishing heads, sens of working from right to left. Mod. SIMEC LEVIP 1+5 600 1+8 Cod. 33-23
Edge single polishing spindle-machine for coast toro and other forms elaboration of flat edges and bullnose profiles and plan automatic, tickness working 20 - 150 mm., The single-head automatic edge-polishing machine 1T , completely designed in stabilized steel in order to avoid any possible deformations, performs and polishes 2 to 15 cm thick bullnose edges. Within the range of round edges it can carry out : full bullnose, demi bullnose, ogee, double bevel, special profiles and multi-bevel ( see chart ). It can furthermore polish straight edges and 2 to 12 cm thick counter-bevels. By means of a control panel the machine can automatically process shaped profiles using shaped wheels as well as the bush-hammering cycle. The spindle head pressure is automatically set. Mod. MONLEVI MULTIPROFIL 1T. Cod. 06-24
The second-hand Polishing - gauging machine for marble tiles 1 calibrator gauging head (rotating diamond head), 5 polishing heads. Polishing used machine useful working of polishing 600 mm., horizontal movement bridge of polishing heads, sens of working from left to right. Mod. SASSOMECCANICA LP 51 Cod. 09-24
AUTOMATIC BRIDGE SAW WITH TILTING HEAD FOR GRANITE WITH DISC OF 825 mm. Basic machine for all workshops: it may fitted with blades, suitable for both marble and granite, and may be operated manually or automatically. Main structures made of cast iron and stainless steel protections. The full version of this machine will be supplied complete of: • motorized tilting head from 0° to 90° for marble and granite • optical collimator • automatic rotating table with blocking device from 0° to 360° • multiple cutting program with colour display • electrical cabinet on floor • inverter • touchscreen colour display
Mod. GMM LEXTA 36 FULL Cod. 11-24
CNC center working machine second-hand, machine with important Z axis, compact 3-axis numerical control machine, for shaping, milling, bevel and hole creation on marble and granite, Z axis 620 mm., complete with program bas-reliefs and cam for specials working. Mod. Campagnola & fedeli CNC Morphè 3000 Cod. 15-24
Second hand combined machine for calibrating and polishing tiles, strips of model granite, equipped with revolving roller calibrating spindles installed on a mobile bridge and dressing and polishing spindles installed on the second bridge. The revolving position of the tools ensures uniform wear and a high removal capacity. Width 600mm., 2 calibrator heads +10 polishing heads - Mod. SIMEC COMBI 600/210 Cod. 17-24
Single head cross second hand cutter machine, pneumatic movement with hunting disk movement for marble and granite, useful cutting 450 mm., diameter disk 400 mm. Mod. Laiti & Petronilli L450 Cod. 18-24
Single head cross second hand cutter machine, pneumatic movement with hunting disk movement for marble and granite, useful cutting 450 mm., diameter disk 400 mm. Mod. Laiti & Petronilli L450 Cod. 18-24